I bought some screw back studs on ebay a few weeks ago and they finally arrived today! So I thought I'd show you what I studded and give a quick step-by-step guide on how I did it.
The ebay store I bought them from is
HERE They were £4.09, you might be able to find some cheaper ones if you looked carefully. However, they were a perfect height at just under 1cm.
These are the two items I studded:
A pair of Topshop shorts from the outlet last summer
And the collar on a chiffon shirt (from New Look)
To show the process I took pictures of how I studded the shirt collar
These are the studs, they come with the screws bagged separately which I thought was very useful, saved a lot of messing around!
I used a crochet hook to make the holes as it was the perfect size and not too sharp so I couldn't harm myself. You could aslo use a very small screw driver or anything with a pointed end. Needless to say if you are under 16, get someone's assistance with this as it can be tricky!
This was the collar before studding
In hindsight I should have marked with chalk where I wanted to pierce the holes, it is tricky getting them perfect if you do not do so.
Gently poke your needle/hook through where you want to make a hole, I did mine on the carpet so I didn't damage anything, I would recommend this rather than on a piece of furniture.
Push the screw through the back of the hole then attach the front of the stud, screw it in well and use a screwdriver to tighten it
One down, 11 to go...
5 down...
The finished collar
I also studded the pocket of the shorts, which were surprisingly easy to stud with the needle
I used exactly the same technique for these!
Let me know if you try this too, I definitely want to do more DIY posts through the summer :)
xo